Low Foundation Roadblocker

The RB 880 CR, with foundation depths of only 300mm, is ideal for use where installation of a conventional roadblocker would interfere with existing underground services.

Available in 2m widths; the blocking segment has a raise height of 1,000mm to ensure that vehicle penetration during attack is kept well within the DoS / British minimum standard requirement for both US and European manufactured vehicles.

The heavy-duty top plate is provided with removable access covers to enable safe access to the control mechanisms for efficient installation / servicing. The roadblocker top plate is located within a steel base section, which in turn is linked to support beams, that run either side of the base section for added structural stability. A secure access chamber is provided at the front of the unit to route the interconnecting control cables and hydraulic hoses between the roadblocker and its Hydraulic Power Unit (HPU).

The blocker is operated by hydraulic actuators, each with a 30 tonnes mechanical lifting weight as well as anti-burst valves to protect against hose sabotage. The HPU contains the hydraulic and electronic control equipment housed in an externally rated cabinet to be positioned locally or remotely to the roadblocker unit.

Additionally an optional debris protection skirt can be fitted to protect internal workings assisting in clean up and redeployment if required.

 

 

RB 880 CR
Tested model
2,000mm W x 1,000mm H
V/7500[N2]/48/90:0/0
V/7500[N2]/80/90:0/0

Bristorm can also provide a range of roadblockers for locations not requiring PAS 68 rating. Please contact the office for further information.